ស៊ីម៉ង់ត៌កាវបិតការ៉ូ Fix Pro Ceramic Tile Adhesive
Buildex
រឹងមាំ
គុណភាព ទំនុកចិត្ត
ស៊ីម៉ង់ត៌កាវបិតការ៉ូ
Fix
Pro
Ceramic
Tile Adhesive
Dry
mortar
¨
Masonry mortar
¨
Interface mortar
¨
Anti-cracking mortar
Cement
Tile | Verified Tile | Mosaic Tile | Marble
ផលិតផលនៅប្រទេសកម្ពុជា
ទំងន់៖
20គីឡូក្រាម
Description
An
economic thick and thin bed cement-based adhesive, ideal for fixing ceramic
quarry and most monocotturra tile, olate, marble and natural stone to interior
and exterior walls and floors.
Surface preparation
All surfaces must be structurally sound, dry, clean and free from
movement, oil, grease, wax, curing compounds and other loose contaminating
materials.
Painted surfaces must be scabbled to expose at least 80% of the original
substrate.
New concrete must be allowed to cure for 28days.
Newly rendered surfaces must be allowed to cure for at least 7 days.
o តែងតែបន្ថែមស៊ីម៉ង់ត៍កាវនៅក្នុងសមាសធាតុរាវ
ដោយលាយជាបន្តបន្ទាប់រហូតដល់ទទួលបានភាពស្អិតរមួត។
o សមាមាត្រលាយស៊ីម៉ង់ត៍ 20គីឡូក្រាម លាយជាមួយទឹក 4 –
4.8លីត្រ។
o ទុកចោលល្បាយរយៈពេល 10នាទី លាយបញ្ចូលគ្នា
បន្ទាប់មកប្រើស៊ីម៉ង់ត៍កាវហើយ។
o បៀកស៊ីម៉ង់ត៍កាវលើស្រទាប់ខាងក្រោមដោយប្រើកាំបិតបៀកទំហំ
6មម * 6មម សម្រាប់ការ៉ូជញ្ជាំង កាំបិត បៀកទំហំ 10មម * 10មម - 12មម - 12មម
សម្រាប់ការ៉ូបាត។
o ត្រូវប្រាកដថាមានមានស្នាមប្រេះនៅក្រោមការ៉ូ។
ចំពោះការ៉ូដែលមានចង្អូរជ្រៅ ស៊ីម៉ង់ត៍កាវ គួរតែត្រូវបានបៀកលើផ្នែកខាងក្រោយនៃការ៉ូ
បន្ថែមពីលើការបៀកលើស្រទាប់ខាងក្រោម។
ចំណាំ៖ ការគ្របដណ្តប់កាវត្រូវតែស្មើគ្នា
និងគ្របដណ្តប់កាវទាំងមូលអោយបានហ្មត់ចត់។
កម្រាស់កម្រាលត្រូវតែមានប្រហែលពាក់កណ្តាលនៃកម្រាស់កាំបិតបៀកកាវដែលបានប្រើ។
Coverage
Coverage varies according to the site
conditions and build up required.
Disclaimer
The use of this product is beyond the
manufacturer’s control, and liability is restricted to the replacement of
materials proven faulty. The manufacturer is nor responsible for any loss or
damage arising from incorrect usage.
Use
o Fix pro can used to lay ties onto the concrete, cement render blockwork
and rendered brickwork surfaces.
o Fix pro can be used on walls and floors in both interior and exterior
application.
o Steel trowel finished surfaces must be acid etched or wire brushed prior
to tiling.
o For old concrete and rendered surfaces, a strong commercial grade
detergent or dagranser must used to
clean.
o Then thoroughly remove detergent/degreaser with fresh water using a high
pressures hose.
o All surface to be dry for at least 24 hours prior to tiling.
Application
o Always add powder to liquid component, mixing continuously until a thick
creamy consistency is achieved.
o The mixing ratio a 20kg of powder to approximately 4-4.8 litres of
liquid.
o Allow the mix to stand for 10 minutes, remix then use the adhesive.
o Spread the adhesive onto the substrate using a 6mm x 6mm notched trowel
for walls, a 10mm x 10mm – 12mm – 12mm notched trowel for floor tiles.
o Ensure that there are so volds under the tiles, for tilen with deep
groves of ridges, the adhesive should be buttered onto the back of the tiles in
the addition to being trowelled onto the substrate.
Note: the adhesive coverage must be uniform and
cover the entire tile thoroughly. The bed thickness must be approximately half
the height of the square notched trowel used.
Shelf life
Store in unopened bags in an elevated cool dry
place. The shelf life is one year under normal storage and transportation
condition.
បច្ចេកវិទ្យាពីប្រទេសអ៊ីតាលី
Technology of Italy
ផលិតផលនៅប្រទេសកម្ពុជា
Made in Cambodia
