ស៊ីម៉ង់កាវ Strong tile Adhesive JOYBOND IIB II

 ស៊ីម៉ង់កាវ Strong tile Adhesive (Joybond IIB II)

Description: An economic thick and thin bed cement-based adhesive, ideal for fixing ceramic, quarry and most monocotturra tifes slate, marble and natural stone to interior and exterior walls and floors.

Surface preparation:

·        All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds and other loose contaminating materials, painted surfaces must be scabbled to expose at least 80% of the original substrate.

·        Very porous surfaces should be primed with Davco 4 in 1 primerflex/additive. New concrete must be allowed to cure for 28days. Newly rendered surfaces must be allowed to cure for least 7days.

·        Steel trowel finished surfaces must be acid etched or wire brushed prior to tiling, for old concrete and rendered surfaces, a strong commercial grade detergent or degreaser must be used to clean.

·        Then thoroughly remove detergent/degreaser with fresh water using a high-pressure hose. All surface to be dry ffor at least 24hours prior to tiling.

·        Ensure all release agents are removed from concrete surfaces, especially tilt-up slab.

Application:

• Always add IIB power to liquid component, mixing continuously until a thick creamy consistency is an achieved.
• The mixing ratio is 20kg of IIB Powder to approximately 4-4.8 lite of liquid.
• Allow the mix to stand for 10 minutes, remix then use the adhesive.
• Spread the adhesive onto the substrate using a 6mmx6mm notched trowel for walls, a 10mmx10mm-12mmx12mm norched trowel for floor tiles.
• Ensure that there are no voids under the tiles. For tiles with deep grooves or didges, the adhesive should be buttered onto the back of the tiles in the addition to being troweled onto the substrate.

Note: the adhesive coverage must be uniform and cover the entire tile thoroughly. The bed thickness must be approximately half the height of the square notched trowel used.

Coverage: Coverage varies according to the site conditions and build up required.

Shelf life: Store in unopened bags in and elevated cool dry place. The shelf life is one year under normal storage and transportation condition.

Product standard and quality degree: GB/T25181-2019

Disclaimer: The Use of this product is beyond the manufacturer’s control, and liability is restricted to the replace-ment of materials proven faulty, the manufacturer is not responsible for any loss or damage arising from incorrect usage.